This listing is for the ceramic wall light as pictured (globe not included)
Lighting Components
This wall light shade comes with a brass lamp holder (240v 50 Hz) compliant with AS/NZ standards, RoHS-compliant, and approved for European markets.
IEC 60238:2004 +A1:2008 +A2:2011
AS/NZS 60238:2007
AS/NZS 60238:2015 + A1
RoHS 2011/65/EU
CE approvals for European markets.
The customer should only proceed with the installation of the light after consultation with a qualified electrician and / or builder in order to determine any extra site-specific suspension requirements and to ensure that the light shade is suspended correctly. Electrical work should only be carried out by a qualified electrician.
*Mounting hardware is included for installation on hardwood surfaces only. For other wall types, suitable fixings must be selected according to the wall substrate. Installation should be carried out using appropriate fixings for the intended mounting surface.
Globe Requirements
The sconce requires a round G45-shaped bulb with an E27 screw base (68 - 70 mm high) 120 v / 240 v depending on the regional requirements. If unsure check with a local qualified electrician in your area. It's best to use a low wattage globe to prevent to ceramic shade from holding heat. A 7 watt LED is recommended.
Aesthetic Considerations
Please be aware that the shade has an element of texture (being hand-formed and hand-carved)
The shade has been photographed under natural light with the aim of showing a true representation of the product. Please be aware that the product colours may appear slightly different depending on the device being used to view the image
Each shade varies in thickness and weight being hand made.
Dimensions
Measurements are approximate and listed in the title. Dimensions are listed as are height x width. Please allow for slight variations.
Care and Cleaning
Clean with a soft brush (like a toothbrush)
For indoor use only
Suitable for dry indoor areas like bedrooms, living rooms and hallways
Not suitable for bathrooms or other damp indoor spaces.
Product Warnings
Keep Out of Reach of Children
Ceramic lamp shades can fall and cause bodily injury and property damage if they are not installed correctly
The customer should only proceed with the installation of the light after consultation with a qualified electrician and / or builder in order to determine any extra site-specific suspension requirements and to ensure that the light shade is suspended correctly. Electrical work should only be carried out by a qualified electrician.
For information on my store policies please visit these pages before checkout Postage Times and Tracking, Returns Policy, Terms of Service & Privacy Policy
This listing is for the ceramic wall light as pictured (globe not included)
Lighting Components
This wall light shade comes with a brass lamp holder (240v 50 Hz) compliant with AS/NZ standards, RoHS-compliant, and approved for European markets.
IEC 60238:2004 +A1:2008 +A2:2011
AS/NZS 60238:2007
AS/NZS 60238:2015 + A1
RoHS 2011/65/EU
CE approvals for European markets.
The customer should only proceed with the installation of the light after consultation with a qualified electrician and / or builder in order to determine any extra site-specific suspension requirements and to ensure that the light shade is suspended correctly. Electrical work should only be carried out by a qualified electrician.
*Mounting hardware is included for installation on hardwood surfaces only. For other wall types, suitable fixings must be selected according to the wall substrate. Installation should be carried out using appropriate fixings for the intended mounting surface.
Globe Requirements
The sconce requires a round G45-shaped bulb with an E27 screw base (68 - 70 mm high) 120 v / 240 v depending on the regional requirements. If unsure check with a local qualified electrician in your area. It's best to use a low wattage globe to prevent to ceramic shade from holding heat. A 7 watt LED is recommended.
Aesthetic Considerations
Please be aware that the shade has an element of texture (being hand-formed and hand-carved)
The shade has been photographed under natural light with the aim of showing a true representation of the product. Please be aware that the product colours may appear slightly different depending on the device being used to view the image
Each shade varies in thickness and weight being hand made.
Dimensions
Measurements are approximate and listed in the title. Dimensions are listed as are height x width. Please allow for slight variations.
Care and Cleaning
Clean with a soft brush (like a toothbrush)
For indoor use only
Suitable for dry indoor areas like bedrooms, living rooms and hallways
Not suitable for bathrooms or other damp indoor spaces.
Product Warnings
Keep Out of Reach of Children
Ceramic lamp shades can fall and cause bodily injury and property damage if they are not installed correctly
The customer should only proceed with the installation of the light after consultation with a qualified electrician and / or builder in order to determine any extra site-specific suspension requirements and to ensure that the light shade is suspended correctly. Electrical work should only be carried out by a qualified electrician.
For information on my store policies please visit these pages before checkout Postage Times and Tracking, Returns Policy, Terms of Service & Privacy Policy
Please read the Return Policy , Postage Times & Tracking & Terms of Service before proceeding to checkout.
